+34 688 945 030
The Motogadget Chronoclassic Speedo is an analog speedometer with many additional features in a classic round case. The design resembles old instruments of the Smiths brand.Approved
Motogadget MOTOSCOPE AND CRONOCLASSIC aluminium support Special for Triumph Bonneville and Thruxton
Black anodized aluminum trim for Motogadget motoscope and cronoclassic
Aluminum support Motogadget Motoscope Classic and Chronoclassic Total length: 185 mm, width: 85 mm (for custom cutting and drilling).Wedge-mounted with msc A outer cup.
MSC B mounting bracket is designed for mounting all the classic series instruments. In this configuration, the instrument is screwed directly on the support (with or without outer cup). Universal aluminum mounting bracket , brushed and anodized. Total length: 185 mm, width: 85 mm
The Push Button Kit M12 comprises a push button with M12 thread, a black anodized sleeve, a black anodized bracket and the connection cable. It's easy to bolt it on at the handle bar with the clamp of a master cylinder or a mirror.
Mini button motogadgetIdeal for MINI mounts, for example m-UNITPossibility to mount inside the handlebarMeasurements:Diameter: 7mmThread diameter: 5mmLength: (including terminals): 14mm
Sensor to be used in conjunction with Motogadget range tachometers and speedometers.Designed to connect to the spark plug wire and provide a more appropriate signal to capture each impulse.Suitable for CDI or ignition systems that have no way of obtaining the signal from the coil (or a very low signal).Easy to install by connecting to the spark plug wire...
Electronic speed sensor standard brand motogadgetCompatible with electronic speedometers motogadget we have on our webIncludes 2 magnetsSensor diameter: 5mmSensor lenght: 25mmEnough cable to reach the speedometer
Air temperature sensor for ambient temperature measurement. For use with classic series
The 82 ohms / 5 W load resistor is required for some specific fuel sensors in combination with LED indicator lights. E. g. fuel reserve indicators based on a thermistor often used by Ducati, Yamaha and other brands.Also used for bypassing exciting current of alternators from BMW or Moto Guzzi when you replace bulbs of charge indicator to LED.