+34 688 945 030
Relay to get the neutral signal on the BMW K75 and K100Served with assembly schemeMeasurements: 22x22x17mm
Reverse polarity relayThis relay replaces the battery charge indicator lamp. It has sufficient resistance to excite the alternator so that the battery does not run out of chargeMeasurements: 34x22x14mm
Bep 3.0 ... and forget about cutting electrical wiring in your BMW K75 or BMW K100Measurements: 62mm x 103mm x 26mm **HOUSING IN WHITE OR BLACK**
Marca YSS Sustituye sin ningún problema el original Distancia entre centros: 350mm Para mas altura ver referencia AT009
Brand YSS Replaces the original without any problem Distance between centers: 365mm IMPORTANT: TO BE ABLE TO ASSEMBLE, YOU MUST MAKE A 12MM HOLE IN EACH BUSHING OF THE SHOCK ABSORBER. OPERATION WITHOUT ANY TYPE OF PROBLEM
Supplied with cap in Black finish Kit suitable for: BMW K75/ K100 / K1100 Monza plug made by Motone with modern DIE CAST HIGH PRESSURE technology in high quality aluminum
Supplied with cap in Polish finished Kit suitable for: BMW K75/ K100 / K1100 Monza plug made by Motone with modern DIE CAST HIGH PRESSURE technology in high quality aluminum
YSS Brand Provides a high performance improvement. Replace the original without any problem Distance between centers adjustable: 350mm - 360mm
Front fender made of special resin, matte black finish with carbon fiber reinforcements for the BMW K Manufactured by UNIT GARAGE Supplied ready for mounting with metal brackets for attachment to the fork
Spectacular exhaust line with stainless steel fitting and very light TITANIUM terminal with removable DB Killer Hand built and Tig welded Simple assembly and allows you to carry a passenger in the rear seat without problems ** IMPORTANT ** The three-in-one collectors in the photo below are not included, they are the original onesCenter stand must be...
Adapter to mount the Unit garage Scrambler exhaust line, on K75 models with ABSWith this adapter you can easily connect the exhaust to the manifold and back off as much as needed
Tank Side Panels For both sides, made of special resin and painted in matt blackIncludes fixing brackets, quick and easy mounting on the original brackets Manufactured by Unit Garage
Desde 27,18 € al mes
Pair of ultra light side panels Made of special resin with carbon fiber reinforcements Matte black finishes Includes clips and hardware for mounting
Rear fender made of full ABS Reinforced base with mounting holes High quality painted in MATTE BLACK Offers an aggressive look to the rear of your BMW K Manufactured by Unit Garage
OHLINS shock absorber 14mm stem, specific to K75 and K100, allows the rear to be raised for a Scrambler aesthetic Variable wheelbase from 378 to 386 mm Spring preload adjustment with millimetric ring nut Significantly increases performance and improves aesthetics IT IS RECOMMENDED TO MOUNT WITH THE SUPPORT AT023 TO ADVANCE THE INCLINATION A LITTLE FURTHER
Made in solid CNC, it allows to advance the fixing of the Öhlins AT022 rear shock absorber The attachment of the original impact to the gimbal falls far behind. The final result is fantastic (only for models with monolever)
4-in-1 manifold with 30 degree inclined exhaust outlet Specific for BMW K100 Made by GPR in stainless steel 51mm diameter outlet tube **WHEN BUYING TOGETHER A GPR EXHAUST IS INCLUDED WITH 54MM BUSHING)**
Made by LSL Aluminum front footrest adapter for BMW K75 / 100IMPORTANT: PRICE OF ADAPTER ONLY. Below You can find the section "ACCESSORIES RECOMMENDED". You can complete there the footrest choosing the option of color desired.
Seat for BMW K In brown or black upholstery The subframe at the rear needs to be cut and a new base plate welded on, which is included along with the plastic cover that covers the bottom half of the seat to hide the various electrical parts All necessary parts on the seat are pre-installed Comes complete with installation hardware and instructions
Desde 25,83 € al mes
Specifically designed for use with the SE019 seat only Converts the two-seater seat to an individual one, giving it a more café racer touch Quickly mounts with 4 screws Made of 3mm unpainted matte black ABS plastic Its design makes any bold paint scheme look better than any rounded tail. Includes installation hardware and instructions
Desde 12,54 € al mes
reduced size Installs on the bike without modifications A great solution for any BMW K Café Racer or Scrambler project using the original front end Made of 3mm unpainted matte black ABS plastic Includes installation hardware and instructions
Desde 9,25 € al mes
License plate holder for BMW K series, all models with rear disc brake system. Perfect for cafe racer and scrambler, fits with the original frame Handmade in Italy COMPATIBLE WITH:- K75 (with rear brake disc)-K100 (8V/16V)*IMPORTANT* Check with your engineer for homologation
License plate holder for BMW K series, all models with rear disc brake system. Perfect for cafe racer and scrambler, fits with the original frame Handmade in Italy COMPATIBLE WITH:- K75 (with rear brake disc)-K100 (8V/16V)*IMPORTANT* Check with your engineer for homologation