LOCTITE 2701 high strength threadlocking, especially chrome surfacesTechnical data:• Maximum size of the thread: up to M20• Resistance: High• Breakaway torque M10 bolts: 38Nm• Service temperature range: -55 ° C - + 150 ° C• Capacity: 5ml
Ideal for fixing pre-assembled, p hardware. eg. instruments screws, electrical connectors and set screws.Technical data•Green color• Maximum thread size: Up to M6• Service temperature range: -55 - +150 ℃• Breakaway torque: 10 Nm• Fixture time steel or brass: 20 min• Fixture time stainless steel: 60 min• Capacity: 10 ml
Threadlocking low strength. normal useTechnical data•Purple color• Maximum size of thread: up to M36• Service temperature range: -55 - +150 ° C• Breakaway torque: 6 Nm• Fixture time steel: 15 min• Fixture time brass: 8 min• Fixture time stainless steel: 360 min• Capacity: 10 ml
Threadlocking - High strength. No leaks. Stick ready for use. Suitable for all metal nuts and bolts.Technical data•Red color• Maximum Thread Size: M50• Service temperature range: -55 - +150 ° C• Breakaway torque: 17 Nm• Dwell time: 5 min• Capacity: 19gr
Threadlocking - Medium strength. No leaks. Stick ready for use. Suitable for all metal fasteners.Technical data•Color blue• Maximum Thread Size: M50• Service temperature range: -55 - + 150 ° C• Breakaway torque: 17 Nm• Fixture time steel: 5 min• Fixture time stainless steel: 20 min• Capacity: 19gr.
LOCTITE 3463 is a versatile two-component epoxy steel load for repairs. It is applied as a putty and when fully cured exhibits high compressive strength and good adhesion to most surfaces.Capacity: 50gr
LOCTITE SI 5926 is a former sealing gaskets flexibly, and resists vibration, thermal expansion and contraction.Advantage• Can be applied to metal parts, plastic, painted or combination of both.• Good thermal and chemical engine oil and antifreeze resistance.Capacity: 40ml
SI is a LOCTITE 5699 together forming surfaces ideal for both metal and plastic, or a combination of both. It is also ideal for flexible flanges, and get a touch dry after 10 minutes.Advantage• Recommended for sealing all types of flanges including printing when required resistance to water / glycol• Tenacious, very high mechanical strengthCapaciadad: 80ml